Solary 1100W Magnetic Induction Heater Kit for Rusty Bolts, 8 Coils

Product Description:

Electromagnetic induction heaters are versatile tools widely used in auto repair shops, garages, and home environments for removing bolts. They are suitable for loosening rusted or seized hardware, vent shades, bearings, gears, pulleys, seat belt parts,
torx bolts, lug nuts, fuel tank straps, and more.

Product Specification:

Voltage: 110V

Wattage: 1100W

Illumination: Equipped with an LED light at the end

Operating Temperature: -40-C to +60-C

Weight: 6.27 pounds

Package content:

1 x Magnetic Induction Heater

Induction Coil Diameter and Quantity: 2 x -25mm

2 x -30mm

2 x -45mm

2 x 600mm

Safety rules:

Read the manual carefully before using the product.

Ensure proper installation: Make sure the coil is fully inserted (the coil plug-in type touches the bottom of the hole and cannot be inserted more) and the fixing parts on both sides are fully tightened before pressing the machine start button.

Maintain a clean and well-illuminated work area to ensure safe operation.

Avoid using the product in moist surroundings or immersing it in water to prevent electrical shock hazards and machine damage.

• Electromagnetic induction heaters are mainly used in auto repair shops, garages, or home environments where bolts need to be taken out. Suit for loosen seized hardware, vent shades,bearings, gears, pulleys,seat belts part,torx bolt, lug nuts, fuel tank straps, etc. 

• Product Specifications:

• Voltage: 110V

  Wattage: 1100W

  Illumination: LED light at the end

  Operating Temperature: -40~+60 -C

  Weight: 6.27 pounds

  Package Content:

  1 x Magnetic Induction Heater

  Induction Coil Diameter and Quantity-

  2 x -25mm

  2 x -30mm

  2 x -45mm

  2 x 600mm

  Safety Rules:

  1.Read manual carefully before using.

  2.Please note that you must ensure that the coil is fully inserted (the coil plug-in type touches the bottom of the hole and cannot be inserted more) and the fixing part on both sides are fully tightened, and then press the machine start button.

      3.Keep your work area clean and well illuminated.

  4.Do not use in moist surroundings or immerse it in water to electrical shock hazard and machine damage.

• Voltage: 110V

• Wattage: 1100W

• Illumination: LED light at the end

• Operating Temperature: -40~+60 -C

• Weight: 6.27 pounds

• Package Content:

• 1 x Magnetic Induction Heater

• Induction Coil Diameter and Quantity-

• 2 x -25mm

• 2 x -30mm

• 2 x -45mm

• 2 x 600mm

• Safety Rules:

• 1.Read manual carefully before using.

• 2.Please note that you must ensure that the coil is fully inserted (the coil plug-in type touches the bottom of the hole and cannot be inserted more) and the fixing part on both sides are fully tightened, and then press the machine start button.

• 3.Keep your work area clean and well illuminated.

• 4.Do not use in moist surroundings or immerse it in water to electrical shock hazard and machine damage.